How to Remove Broken Spark Plug Without Easy Out

If you’re trying to remove a broken spark plug and don’t have an easy out, there are a few methods you can try. The first is to use a drill bit that’s slightly smaller than the diameter of the spark plug hole. Drill into the center of the broken spark plug until the drill bit is about halfway through.

Then, use a pair of pliers to twist and pull the broken spark plug out. If this doesn’t work, you can also try using a screwdriver and hammer to tap around the edge of the broken spark plug until it loosens and comes out. Whichever method you use, be sure to take precautions so that you don’t damage the threads in the spark plug hole.


  • If the broken spark plug is still in the engine, start by removing the engine’s oil dipstick and unscrewing the oil fill cap to relieve any pressure in the crankcase
  • Next, remove the spark plug wire from the plug
  • Using a ratchet and spark plug socket, attempt to remove the broken spark plug from the engine
  • If the broken spark plug won’t budge, spray some penetrating oil onto the threads of the plug and let it sit for a few minutes before trying again
  • You may also need to use a breaker bar or impact wrench to loosen stubborn plugs
  • Once you’ve removed the broken spark plug, inspect it for damage and replace it with a new one if necessary

How to Remove Broken Spark Plug Pieces

If you’ve ever had the misfortune of a spark plug breaking while you’re trying to remove it, you know how frustrating it can be. Trying to remove the broken pieces with pliers can damage the threads in the cylinder head, making it even harder to remove the spark plug. The best way to remove broken spark plug pieces is with a special tool called a heli-coil extractor.

This tool is designed specifically for removing broken spark plugs without damaging the threads. To use a heli-coil extractor, first start by hand-tightening the extractor into the center of the broken spark plug. Once it’s tight, use a ratchet or impact wrench to turn the extractor clockwise until it starts to back out of the cylinder head.

As you continue turning, the extractor will pull out all of the broken pieces of the spark plug along with it. Once all of the broken pieces have been removed, you can then proceed with installing a new spark plug. Be sure to use plenty of thread sealant on the new plug so that it doesn’t vibrate loose and cause another breakage down the road.

Easy Out Spark Plug Extractor

If you’ve ever had a broken spark plug, then you know how frustrating it can be to remove. They’re usually located in tight spaces and can be difficult to reach. The good news is that there’s an easy way to extract them using a tool called a spark plug extractor.

A spark plug extractor is a simple tool that consists of a long rod with a handle on one end and a hook on the other. The hook is inserted into the hole where the spark plug is located and then turned counterclockwise. This will loosen the spark plug so that it can be removed by hand.

Spark plug extractors are available at most hardware stores and are relatively inexpensive. If you’re struggling to remove a broken spark plug, give one of these tools a try – it just might make your life a whole lot easier!

How to Remove Stuck Spark Plug from Aluminum Head

The process for removing a stuck spark plug from an aluminum head is as follows: 1. Disconnect the negative battery cable. 2. Remove the ignition coil(s) and/or spark plug wires.

3. Apply penetrating oil to the threads of the spark plug, taking care not to get any on the electrode or boot. Allow the oil to penetrate for at least 15 minutes. 4. Insert a Spark Plug Extractor tool into the socket and turn counterclockwise until tight then continue turning with moderate force until the spark plug loosens and can be removed by hand (be sure to wear gloves).

If you are having difficulty removing the spark plug, you may need to use a ratchet or breaker bar instead of the extractor tool.

Broken Spark Plug Extractor

If you’re a car owner, sooner or later you’ll need to deal with a broken spark plug. While this can be a tricky and frustrating problem, there are fortunately some tools that can make the job much easier. A broken spark plug extractor is one of those tools.

As the name suggests, a broken spark plug extractor is designed to remove broken spark plugs from your engine. It’s a fairly simple tool that consists of a long, thin shaft with a spiral tip on the end. The spiral tip helps to grip onto the broken spark plug so it can be unscrewed and removed.

Using a broken spark plug extractor is relatively straightforward. First, you’ll need to locate the broken spark plug in your engine using a flashlight (if it’s dark) or by feel (if you can reach it). Once you’ve found it, simply insert the spiral tip of the extractor into the hole where the spark plug was and begin turning it counterclockwise.

The extractor will grab onto the breakage inside the hole and allow you to unscrew and remove the entire thing. While removing a broken sparkplug may sound like a daunting task, it’s actually not too difficult if you have the right tool for the job. So if you find yourself dealing with a broken sparkplug, don’t panic – just grab yourself a trustybroken Spark Plug Extractorand get to work!

How to Remove Broken Spark Plug from Motorcycle Engine

If you’re lucky, removing a broken spark plug from a motorcycle engine will be a simple and straightforward process. However, if the spark plug is stuck or seized in the engine, it can be a real challenge to remove. Here are some tips on how to remove a broken spark plug from a motorcycle engine:

1. First, make sure that the spark plug is actually broken. If it’s just stuck or seized, you may be able to loosen it with some WD-40 or another penetrating lubricant. 2. If the spark plug is actually broken, you’ll need to remove the cylinder head to access the spark plug hole.

This is usually a pretty involved process, so unless you’re confident in your mechanical skills, it’s best to take your bike to a qualified mechanic. 3. Once you have access to the spark plug hole, use a pair of pliers or an extractor tool to remove any debris from around the hole. This will give you a clear area to work with when trying to extract the broken spark plug.

4. Next, use an easy out tool or bolt extractor tool to try and remove the broken spark plug from the hole. Apply gentle pressure and turn the tool clockwise until thebroken piece startsto come out ofthehole. Be careful not toover-tightenor forcethetool as this could damagethethreads in th ehol eand make removal even more difficult .

I f afterseveraltriesyou stillcan’tremovethebrokensparkplug , y oumayneedtouse acarburetorcleaneroralcohol tomeltanysealantthat maybeholdingitthehole .Onceyou’vefinallyremovedthebrokenpiece , cleantheareaaroundth eh olebeforeinstallinganewsparkplug .

Broken Spark Plug Removal Tool Autozone

If your car is acting up and you think it might be a broken spark plug, don’t panic! You can remove the spark plug yourself with a few simple tools. First, you’ll need a ratchet and an extension.

Attach the extension to the ratchet, and then use the ratchet to loosen the spark plug. Once it’s loose, you can unscrew it by hand. Next, you’ll need a spark plug socket.

This is a special socket that’s made to fit over spark plugs. Place the socket over the spark plug and screw it on until it’s tight. Finally, use the ratchet to remove the spark plug from the socket.

Be careful not to drop it! Once you have removed the broken spark plug, take it to your local auto parts store so they can match you up with a new one.

Cost to Remove Broken Spark Plug

If your car has a broken spark plug, it will need to be removed and replaced. The cost of this repair will depend on the make and model of your car, as well as the severity of the damage. In most cases, you can expect to pay between $200 and $400 for this repair.

5.4 Spark Plug Threads Broke off in Head

If you’re a car owner, then you know that one of the most important parts of your vehicle is the spark plugs. These little pieces work to create the spark that ignites the air/fuel mixture in your engine, and without them, your car simply wouldn’t run. But what happens when a spark plug breaks?

Unfortunately, this is a fairly common problem and one that can be quite difficult to fix. If a spark plug broke off in your head, then you’re going to have to remove the broken piece before you can replace the entire plug. And trust us, this is not an easy task.

The first thing you’ll need to do is locate the broken piece. This can be done by using a flashlight and looking down into the cylinder. Once you’ve found it, use a pair of needle-nose pliers to remove it from the head.

Once the broken piece has been removed, you’ll need to clean out the threads in the head so that they’re free of debris. You can do this by using a tap set or some other type of thread cleaning tool. With the threads clean, you can now install a new spark plug.

Be sure to use plenty of thread sealant on the new plug so that it doesn’t come loose and cause further damage.

How to Remove Broken Spark Plug Without Easy Out


Can You Drill Out a Broken Spark Plug?

It is possible to drill out a broken spark plug, but it is not recommended. This is because drilling out the spark plug can damage the threads in the cylinder head, which can lead to leaks and other problems. In addition, drilling out the spark plug can also damage the combustion chamber and piston.

How Do You Remove a Spark Plug Without Spark Plug Remover?

Spark plugs are an essential part of any gasoline engine, and they need to be replaced periodically. The interval depends on the type of engine, but it is typically between 20,000 and 30,000 miles. Removing a spark plug without a spark plug remover can be difficult, but it is possible with the right tools.

First, you will need a socket wrench that is the correct size for your spark plugs. Next, you will need to locate the spark plug wires and remove them from the plugs. Once the wires are removed, you can use the socket wrench to loosen and remove the spark plugs.

Be sure to keep track of which order the wires were in so that you can put them back in correctly when you install new plugs.

What Happens If You Break a Spark Plug?

If you break a spark plug, it will no longer be able to create the spark needed to ignite the air/fuel mixture in your engine. This can lead to several problems, including: -Your engine may run rough or misfire

-Your engine may lose power -Your fuel economy may suffer


If you’re trying to remove a broken spark plug and don’t have an easy out, there are a few things you can do. First, try using a pair of needle nose pliers to grab onto the end of the spark plug that’s sticking out. If that doesn’t work, you can try using a hammer to tap around the circumference of the spark plug.

This will loosen it up and hopefully allow you to pull it out. If all else fails, you may need to drill into the center of the spark plug and then use an easy out to remove it.

Owner at Autopartslife
Hello, I am Michael Smith, founder of Autopartslife blog, which teaches automotive techniques, solutions, tips, tool reviews, and more.

Michael Smith is a professional automotive technician who has been diagnosing and repairing vehicles in Alaska County for more than 15 years. As founder and CEO of Autopartslife, Michael is dedicated to sharing his vast array of knowledge and experience to help make your automotive journey a much smoother, faster, and more enjoyable ride.
Michael Smith
Latest posts by Michael Smith (see all)

1 thought on “How to Remove Broken Spark Plug Without Easy Out”

  1. Sounds interesting! I love such games in my phone, they help to spend time while waiting for smth. I always search for new ones in app store and different game blog such as, but i didn’t know about this game. Thanks for your article!

Leave a Comment

Your email address will not be published.