If you’re like most people, you probably don’t enjoy seeing the maintenance light on your Acura TSX come on. Luckily, it’s easy to reset the maintenance light and get it back to normal. Here’s a quick guide on how to do it.
First, find the button that says “engine start/stop.” It’s usually located on the dash near the steering wheel. Press and hold the button for about five seconds.
Next, turn the ignition to the “on” position without starting the engine. Press and release the gas pedal three times within five seconds. Finally, start the engine and the maintenance light should be reset.
If you have any questions or concerns, be sure to consult your owner’s manual or take your car to a qualified mechanic.
- Start the car and let it idle for a few minutes to warm up
- Turn off the car and locate the maintenance light
- It will be on the dash, near the speedometer
- Press and hold the button next to the light for a few seconds
- The light will flash and then stay on solid
- This means the reset is complete
2009 – 2014 Acura TSX oil/maintenance light reset
2004 acura tsx maintenance light reset
How to Reset the Maintenance Light on a 2004 Acura TSX If you’re a 2004 Acura TSX owner, you know that when the maintenance light comes on, it’s time for some routine maintenance. But what exactly does that light mean, and how do you reset it?
Here’s a quick rundown on the 2004 Acura TSX maintenance light: The light comes on when the car needs an oil change, which is typically every 7,500 miles. To reset the light, simply change the oil and filter according to the instructions in your owner’s manual.
Once the oil is changed, the light will reset itself and turn off. It’s that simple! So next time your 2004 Acura TSX’s maintenance light comes on, don’t panic – just change the oil and reset the light.
Your car will thank you for it.
2005 acura tsx maintenance reset
If you own a 2005 Acura TSX, you know that regular maintenance is key to keeping your vehicle running smoothly. But what do you do when the Maintenance Required light comes on? Here’s a quick guide to resetting the Maintenance Required light on your 2005 Acura TSX:
1. Start the engine and let it idle for a few minutes. 2. Turn off the engine and open the hood. 3. Locate the black Maintenance Required reset button on the driver’s side of the engine compartment.
4. Press and hold the reset button for about 5 seconds. 5. Close the hood and start the engine. The Maintenance Required light should now be reset.
Keep in mind that this light will come on again after you’ve driven a certain number of miles, so be sure to schedule regular maintenance appointments with your Acura dealer.
How to reset oil light acura tsx 2012
If your oil light is on, it means your engine is low on oil. To reset the oil light on your Acura TSX, follow these steps: 1. Turn the ignition key to the ON position.
2. Press and hold the Select/Reset button on the instrument panel for about 10 seconds. 3. The oil light will go off and you can release the button. 4. Start the engine and check the oil level.
Add oil if necessary. 5. The oil light should now be reset.
How to reset oil life on acura tsx 2008
If your 2008 Acura TSX is equipped with the Maintenance Minder system, the oil life indicator will need to be reset when you change the oil. Here’s how to do it: 1. Start the engine and let it run for a few minutes to warm up.
2. Turn the engine off and locate the Maintenance Minder button. It’s usually on the instrument panel near the speedometer. 3. Press and hold the Maintenance Minder button for about 5 seconds.
The oil life indicator will reset and the message “Oil Reset” will appear on the display. 4. Start the engine and drive as usual. The oil life indicator will now be reset and will start counting down from 100% to indicate when the next oil change is due.
How do you reset the maintenance required light on a 2005 Acura TSX?
If you’re like most people, you probably don’t enjoy seeing the “Maintenance Required” light on your dash. Luckily, resetting it is a pretty simple process. Here’s how to do it on a 2005 Acura TSX:
1. Start the car and let it idle for a few minutes. 2. Turn off the engine and open the hood. 3. Locate the maintenance required light on the dash.
It’s usually located near the speedometer. 4. Use a small screwdriver or other pointed object to press and hold the reset button for the maintenance required light. 5. While still pressing the reset button, turn the key to the “On” position (but don’t start the engine).
6. After about 10 seconds, the maintenance required light should turn off. And that’s it! You’ve now reset the maintenance required light on your Acura TSX.
How do you reset the maintenance required light on a 2006 Acura TSX?
If you’re like most people, you probably don’t enjoy seeing the “Maintenance Required” light on your dash. Not only does it mean that you have to take time out of your busy schedule to bring your car in for service, but it can also be a bit of a mystery as to what, exactly, the light is trying to tell you. Fortunately, resetting the light is a pretty simple process.
All you need is a few minutes and a Phillips head screwdriver. First, locate the screw that holds the negative battery terminal in place. loosen the screw and disconnect the negative terminal.
This will prevent your car from accidentally starting while you’re working on it. Next, find the fuse box, which is usually located under the dash. Once you’ve located it, open the box and find the fuse labeled “Engine.”
Remove this fuse and wait 30 seconds. This will give the car’s computer time to reset. Finally, replace the fuse and reattach the negative battery terminal.
Start the car and, voila! The “Maintenance Required” light should be gone. While it’s not the most exciting task, resetting the maintenance required light is a good way to keep on top of your car’s maintenance.
And, who knows? Maybe one day that light will come on just as you’re pulling into the garage for your regularly scheduled oil change.
How do you reset the maintenance light on a 2009 Acura TSX?
There are a few different ways that you can reset the maintenance light on your 2009 Acura TSX. One way is to simply disconnect the battery for a few minutes and then reconnect it. This will cause the light to reset itself.
Another way is to use a code reader to clear the maintenance light. You can usually find these at your local auto parts store. Simply follow the instructions that come with the code reader to clear the light.
If you have an older model Acura TSX, you may need to manually reset the light. To do this, locate the fuse box under the hood and find the fuse labeled “MAINT.” Remove this fuse for a few seconds and then replace it.
This should reset the light.
How do you reset the maintenance light on a 2012 Acura TSX?
The maintenance light on a 2012 Acura TSX can be reset by pressing and holding the Trip Odometer button for approximately 10 seconds. The light will then reset and turn off.
If you need to reset your maintenance light on your Acura TSX, there are a few simple steps you can follow. First, locate the maintenance light on your dash. It should be a small, yellow light.
Once you’ve found it, press and hold the reset button for 5 seconds. After 5 seconds, the light should turn off. If it doesn’t, repeat the process.